Manipulation of Table Control



Manipulation of Table Control

Introduction

       A table control is an area on the screen in which the system displays data in tabular form. It is processed using a loop.

Benefits of using a table control are

  • Resizable table for displaying and editing data.
  • The user or program can change the column width and position, save the
  • changes, and reload them later.
  • Check column for marking lines; marked lines are highlighted in a different color.
  • Line selection: single lines, multiple lines, all lines, and deselection.
  • Column headings double as pushbuttons for marking columns.
  • Scrollbars for horizontal and vertical scrolling.
  •  Any number of key (leading) columns can be set.

Go to SE38 and type Program Name and click ‘CREATE’

Select type as ‘MODULE POOL’ and status as ‘TEST PROGRAM’ and click ‘SAVE’

 

Select Local Object ( You can also select your own package and save)

 


Click the icon (Display Object List) in the toolbar

 

Write the below coding (Defining Internal tables for table controls SOURCE and DESTINATION)

 


(Cont.)Define table controls SORUCE and DESTINATION to be created in the screen



Right Click the progam name and select Create->Screen

 

Provide screen number (Here 9000) and click ‘CONTINUE’

 

Provide Short Description and click ‘LAYOUT’ in the toolbar

 

Select ‘TABLE CONTROL’ icon in the toolbar

 

Tap on the screen to create table controls as shown below

 

Click ‘DICTIONARY/PROGRAM FIELDS’ in the toolbar

 

Enter the structure defined in the program and click ‘GET FROM PROGRAM’ and select all fields

 

Click on the table control to copy the structure

 


Provide the following attributes in the attribute panel for each table control

 

Create push buttons as shown below using ‘PUSH BUTTON’ icon in the toolbar and provide attributes for each element as following and Save the screen

 


Double click on screen 9000 and enter the below code in the flow logic tab

 


Double click on ‘STATUS_9000’ and select ‘YES’

 


Write the below code in the generated module block

 

(Cont.)


(Cont.)


Add a code ‘MODULE modify_source’ and double click on it and select ‘YES’

 

Write the below code in the generated module block

 

Double click ‘USER_COMMAND_9000’ and select ‘YES’

 


Write the below code in the generated module block and activate program

 

(Cont.)


(Cont.)


(Cont.)


 

(Cont.)

 

(Cont.)

 

Right click on program name and select Create->Transaction

 

Provide Transaction Name and short description and select ‘CONTINUE’

 

Provide attributes shown below and save and execute the program

 

EXECUTE : Activate Program and Right click Program name and select
Execute->In a new window

 

OUTPUT :

Select All

 


Deselect All

 



Invert Selection

 


Delete Rows

 


Restore deleted rows

 


Move selected rows to destination table

 


Sort rows in ascending order

 



Sort rows in descending order

 


Complete Coding in text format

Program

*General Structure
TYPES    : BEGIN OF LS,
           MATNR 
TYPE MARA-MATNR,
           ERNAM 
TYPE MARA-ERNAM,
           MTART 
TYPE MARA-MTART,
           MATKL 
TYPE MARA-MATKL,
           MEINS 
TYPE MARA-MEINS,
           MARK,
           
END OF LS.*Work area and internal table for both table control with similiar data
DATA     : LS_SOURCE TYPE LS,
           LS_DESTINATION 
TYPE LS,
           LT_SOURCE 
LIKE TABLE OF LS_SOURCE,
           LT_DESTINATION 
LIKE TABLE OF LS_DESTINATION.*Internal table for restoration data
DATA     : LT_RESTORE LIKE TABLE OF LS_SOURCE.*Table controls
CONTROLS : SOURCE TYPE TABLEVIEW USING SCREEN 9000,
           DESTINATION 
TYPE TABLEVIEW USING SCREEN 9000.*Work area for table control columns
DATA     : LS_SRC_COL LIKE LINE OF SOURCE-COLS,
           LS_DST_COL 
LIKE LINE OF DESTINATION-COLS.DATA     : FLAG,                "To fill source table once
           
FIELD(20).           "To store column name in table control


Screen Flow Logic

PROCESS BEFORE OUTPUT.MODULE STATUS_9000.LOOP AT LT_SOURCE INTO LS_SOURCE WITH CONTROL SOURCE.ENDLOOP.LOOP AT LT_DESTINATION INTO LS_DESTINATION WITH CONTROL DESTINATION.ENDLOOP.


PROCESS AFTER 
INPUT.LOOP AT LT_SOURCE.MODULE MODIFY_SOURCE.ENDLOOP.LOOP AT LT_DESTINATION.ENDLOOP.MODULE USER_COMMAND_9000.


PBO (Module STATUS_9000 output)

module STATUS_9000 output.*  SET PF-STATUS 'xxxxxxxx'.
*  SET TITLEBAR 'xxx'.
*To fill table control(SOURCE) once
IF FLAG = ''.*Data selection for source table
SELECT * UP TO 5 ROWS
  
FROM MARA
  
INTO CORRESPONDING FIELDS OF TABLE LT_SOURCE.
FLAG = 
'X'.ENDIF.*If internal table is not empty
IF NOT LINES( LT_SOURCE ) = 0.*Set no. of table control lines(SOURCE)
SOURCE-
LINES = LINES( LT_SOURCE ).ELSE.*Disable table control lines
SOURCE-
LINES = -1.ENDIF.*If internal table is not empty
IF NOT LINES( LT_DESTINATION ) = 0.*Set no. of table control lines(DESTINATION)
DESTINATION-
LINES = LINES( LT_DESTINATION ).ELSE.*Disable table control lines
DESTINATION-
LINES = -1.ENDIF."To set all columns in read only mode
LOOP AT DESTINATION-COLS INTO LS_DST_COL.
LS_DST_COL-
SCREEN-INPUT = ''.MODIFY DESTINATION-COLS FROM LS_DST_COL.ENDLOOP."To set all columns in read only mode
LOOP AT SOURCE-COLS INTO LS_SRC_COL.
LS_SRC_COL-
SCREEN-INPUT = ''.MODIFY SOURCE-COLS FROM LS_SRC_COL.ENDLOOP.endmodule.                 " STATUS_9000  OUTPUT

PAI ( Module MODIFY_SOURCE input)

module MODIFY_SOURCE input."Updating changes from table control to internal table
MODIFY LT_SOURCE FROM LS_SOURCE INDEX SOURCE-CURRENT_LINE.endmodule.                 " MODIFY_SOURCE  INPUT

PAI ( Module USER_COMMAND_9000 input)

module USER_COMMAND_9000 input."User command field
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
  
WHEN 'DELETE'.
  
"Retrieving record selected
    
LOOP AT LT_SOURCE INTO LS_SOURCE WHERE MARK = 'X'.
  
"Appending record to be deleted in restore table
    
APPEND LS_SOURCE TO LT_RESTORE.
  
"Deleting record to be deleted
    
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
  
"Decrementing table control line by one
    SOURCE-
LINES = SOURCE-LINES - 1.
    
ENDLOOP.


  
WHEN 'RESTORE'.
  
"Moving records from restore table to source table
    
APPEND LINES OF LT_RESTORE TO LT_SOURCE.
  
"Sorting source table in ascending order
    
SORT LT_SOURCE BY MATNR.
  
"Clearing contents in restore table
    
REFRESH LT_RESTORE.

  
WHEN 'MOVE'.
  
"Retrieving record selected
    
LOOP AT LT_SOURCE INTO LS_SOURCE WHERE MARK = 'X'.
  
"Making records being not selected
    
CLEAR LS_SOURCE-MARK.
  
"Moving record to destination table
    
APPEND LS_SOURCE TO LT_DESTINATION.
    
ENDLOOP.
  
"Sorting destination table in ascending order
    
SORT LT_DESTINATION.
  
"Deleting duplicate records
   
DELETE ADJACENT DUPLICATES FROM LT_DESTINATION COMPARING ALL FIELDS.

  
WHEN 'SELECT'.
  
"Retrieving record being not selected
    
LOOP AT LT_SOURCE INTO LS_SOURCE WHERE MARK <> 'X'.
  
"Making record being selected
    LS_SOURCE-MARK = 
'X'.
  
"Updating Changes to source table
    
MODIFY LT_SOURCE FROM LS_SOURCE TRANSPORTING MARK.
    
ENDLOOP.

  
WHEN 'DESELECT'.
  
"Retrieving record being selected
    
LOOP AT LT_SOURCE INTO LS_SOURCE WHERE MARK = 'X'.
  
"Making record being not selected
    LS_SOURCE-MARK = 
''.
  
"Updating Changes to source table
    
MODIFY LT_SOURCE FROM LS_SOURCE TRANSPORTING MARK.
    
ENDLOOP.

  
WHEN 'INVERT'.
  
"Retrieving record being selected
    
LOOP AT LT_SOURCE INTO LS_SOURCE WHERE MARK = 'X'.
  
"Setting mark value to temporary value other than 'X' or space( here 'Y')
    LS_SOURCE-MARK = 
'Y'.
    
MODIFY LT_SOURCE FROM LS_SOURCE TRANSPORTING MARK.
    
ENDLOOP.
  
"Retreiving record being not selected
    
LOOP AT LT_SOURCE INTO LS_SOURCE WHERE MARK = ''.
  
"Making record being selected
    LS_SOURCE-MARK = 
'X'.
    
MODIFY LT_SOURCE FROM LS_SOURCE TRANSPORTING MARK.
    
ENDLOOP.
  
"Retrieving record whose mark value has been set to temporary value( here 'Y')
    
LOOP AT LT_SOURCE INTO LS_SOURCE WHERE MARK = 'Y'.
  
"Making record being not selected
    LS_SOURCE-MARK = 
''.
    
MODIFY LT_SOURCE FROM LS_SOURCE TRANSPORTING MARK.
    
ENDLOOP.

  
WHEN 'SORT_A'.
  
"Retrieving column being selected
    
READ TABLE SOURCE-COLS INTO LS_SRC_COL WITH KEY SELECTED = 'X'.
  
"Assigning column name to variable
    
FIELD = LS_SRC_COL-SCREEN-NAME+10(10).
    
IF SY-SUBRC = 0.
  
"Sorting source table in ascending order if any column selected
    
SORT LT_SOURCE BY (FIELD).
    
ENDIF.

  
WHEN 'SORT_D'.
  
"Retrieving column being selected
    
READ TABLE SOURCE-COLS INTO LS_SRC_COL WITH KEY SELECTED = 'X'.
  
"Assigning column name to variable
    
FIELD = LS_SRC_COL-SCREEN-NAME+10(10).
    
IF SY-SUBRC = 0.
  
"Sorting source table in descending order if any column selected
    
SORT LT_SOURCE BY (FIELDDESCENDING.
    
ENDIF.

  
WHEN 'EXIT'.
  
"Leaving program
    
LEAVE PROGRAM.
    
ENDCASE.endmodule.                 " USER_COMMAND_9000  INPUT


By Karthick.R, Kaavian Systems Pvt Ltd.

11 comments:

  1. Check out http://www.sapdev.co.uk/dialog/tabcontrol/tc_basic.htm for simple step by step instructions on how to create a dynpro table control

    ReplyDelete
  2. Good Example for the beginners with all the possible actions on the table control.
    Thanks...........

    ReplyDelete
  3. Very Nice sir, can u provide a tutorial to change the field name and record at run time ?
    Thanks & regards
    Prashant N.

    ReplyDelete
    Replies
    1. Hi Prashant,
      Please find below link for solution...

      http://theabap.blogspot.in/2013/06/changing-label-of-push-button.html

      Delete
  4. Very good tutorial. Could have been best if you would have added insert/create/modify table control records fields too. But still very well explained.

    ReplyDelete
  5. sooooper very useful for beginners.....

    ReplyDelete
  6. How to select column in table control.Pls help.I am not able to make selected = 'X'.

    ReplyDelete
  7. abe pdhai likhai me dhyan do .
    ABAP sikho

    ReplyDelete